But it’s obviously not the only tool-holding masterpiece ever built; it’s just dumb luck that the man who inherited it happened to loan it to the Smithsonian in the s, enabling the world to learn about it. Enter a caption optional How many other craftspeople built pieces like this that we just never heard about? There might be cases like this scattered across the world—or worse, lost to the ravages of time. Enter a caption optional Enter a caption optional Enter a caption optional Sadly, this one isn’t attached to a particular maker and has no story behind it. Rau Antiques, is described as a “Woodworker’s Tool Compendium” and contains some implements of far more general provenance than Studley’s piano-making tools. The cabinet is estimated to date to the early 20th Century and contains tools from the prior century.
User profile shortcuts
In the example, the date code 83B indicated a machine built in November, which would have been in Rockwell’s fiscal year. Dated coded serial numbers are covered in this original document. On April 12, , Pentair purchased the Rockwell machinery line.
Klein Cutlery is a leading manufacturer of hand tools and occupational equipment for professional tradesman. Mumme Tools became a sister company of Klein Tools, Inc in July Mumme, which is also a family-owned company, produces a wide-range of forged hand tools in South Australia and is Australia’s leading mining tool manufacturer.
The medallions on Disston handsaws changed more over time than any other feature on the saw. By using the medallion, you can estimate the age of your saw. The Medallions and Timeline of Saw Manufacture The medallions on Disston saws give the most accurate indication of manufacturing dates for handsaws, panel saws, and backsaws. The first complete timeline of Disston handsaws was written by Pete Taran and published in the Winter issue of the Fine Tool Journal.
His article assigned manufacturing dates to Disston saws, based on the medallions, creating what is called a type study. Since the publication of Taran’s ground-breaking research, the number of known medallions has increased significantly, and they have been featured on the Disstonian Institute website. Medallions did not appear in the catalogs, only illustrated representations of the saws.
Catalogue of American nails, wire, barbed wire, staples tacks, poultry netting, etc. United States Steel Corporation Subsidiary. The mid Victorian Elwell catalog of forged tools. A facsimile with an introduction by Richard Filmer. The traditional tools of the carpenter and other craftsmen.
Specializing in the sale of vintage, Disston hand saws of all ages and styles since Follow us on Instagram! Our mission here at Vintage Saws is to promote knowledge about vintage hand saws as well as provide the highest quality saws of the 19th and 20th Century to the woodworker and collector alike.
Overall, antique tools are quite common and plentiful in the collecting market. Most are easily distinguished as being heavy in weight, well made, and may contain manufacturer inscriptions. Many contain fine metal such as brass accents or ornate wood, such as inlays. The process of identifying these tools can be easy provided you have the time to spend sleuthing.
Identification of Antique Tools Measure your tool and make notes of any manufacturer’s marks or inscriptions. Note any key features of the tool such as special or fancy materials used that may also help you identify the tool. Determine if there is a patent number on your tool.
Explore Old Tools, Antique Tools, and more!
We may take our time but in the end, it’s gonna look nice. Stuff may come, stuff may go, but it’ll all be here plus lots more. The famous Peugeot Freres, makers of numerous products which, of course, included tools. This catalog from July of includes woodworking as well as masonry tools.
Introduction. This is the first of several articles covering Craftsman brand tools. This installment will focus on the development of the Craftsman brand during the s and s, as well as covering some of the tools sold by Sears in the pre-Craftsman era, in order to provide background context.
User Tools These tools have been selected with the user in mind. Most have been cleaned and are ready to use except for sharpening and a final tuning. This we leave for the user, knowing that each woodworker may use a different technique. We try to select tools only in the best condition. User tools are for the most part a repeatable, stock item so it is quite possible that the actual tool offered may already be sold.
Not to worry, we will most likely have an identical tool of similar quality. If any of our tools interest you please note its stock number and review our terms , conditions and how to place an order. This chisel has an applied cast steel cutting edge.
Age of Bailey/Stanley planes
The Antique Reloading Tool Collectors Association has an excellent website with much more information on bullet molds, reloading tools and related items, as well as membership information. They have always had some appeal to the cartridge or gun collector, or person interested in mechanical devices. Although still in the early stages of development, they have an excellent web site and some truly dedicated researchers.
History of ironing. Flattish hand-size stones could be rubbed over woven cloth to smooth it, polish it, or to press in pleated folds. Simple round vintage kitchen stuff, crafts, and other things to do with home life in the past. There’s space for comments and discussion too.
Edwards and Tom Wells, researchers from Louisiana State University, have published a working paper on historical nail technology. Their work chronicles the development of nail technology from to The study was undertaken to help historians pinpoint the precise construction dates of historical buildings. They begin by explaining the three ways in which nails are made: Forged nails are hand shaped one at a time by a blacksmith.
After the shaft is shaped, it is placed into a heading tool and the head is formed with several blows of a hammer. This process produces what is commonly called the Rose Head nail. Cut nails are made in a two-step process. First, blanks are cut from flat strips of iron. Second, the nail is held tight while the head is formed by the blow of a mechanical heading device. Drawn nails are made by pulling wire through a series of dies.
Spear Jackson Saws
Antique Bottle Questions This section provides a list of antique bottle collectors who have graciously agreed to offer advice in their area of interest. When asking a question, remember to provide: Exact wording embossed i. Color of the bottle e. For help, see Antique Bottle Colors. Height of the bottle.
Union Hill Antique Tools is dedicated to the use, collection, preservation, and extension of antique tool knowledge. Here you will find many articles of interest if you like collecting and using antique tools. Use the red links at the top to navigate the site. The tools included here didn’t require electricity and have collectible tool value.
Levels came next, and a few years later they got into the woodworking plane making business producing a line of metal bodied planes utilizing Leonard Baileys Patents and designs for metal bodied bench planes and scrapers. That association had a rocky history and that story is detailed in Roger Smiths books on the history and development of Patented Transitional and Metallic Planes in America Vol. They are worthwhile reads. After Stanley’s initial success with Leonard Bailey’s patents and the acceptance of metal bodied planes by America’s working craftsmen Stanley added new designs and innovative models to their line of metal bodied planes including many different rabbet planes, dado planes, compass planes and other specialty planes in addition to standard bench plane lines.
These designs have famous names like the Miller’s Patent or Schrade associated with them as well as other lesser known inventors patents and ideas that Stanley bought and utilized in their designs. The Stanley Rule and Level Company spent a lot of time and effort developing a market and filling the need or demand of early craftspeople wanting top quality tools.
Stanley woodworking planes were designed for use in a wide range of applications in many different trades besides those typically associated with woodworking or cabinetry. They produced specialty planes aimed at cabinet makers, patternmakers, butchers, electricians, and more to fill this need. The full range of Stanley’s plane line will be found on this page.
Many of these vintage and antique Stanley planes are suitable for both the advanced or beginning tradesmen and craftsmen for use today. Many will be in fine condition and acceptable for inclusion in collections of antique tools and planes. Antique woodworking planes including some rare and unusual patented planes by other makers can be found my other tool pages right now.
Spiralux saw grinding jig Something a bit different here. A model saw grinder from the Spiralux Co. The tool is used to sharpen circular saw blades. It is brand new appears to be unused and is complete with original box and directions. This has the heavy duty plunger and the plastic magnifying glass.
The saw marks on an old piece of lumber can give information about the type of mill that was used, but using the marks for dating the board needs to be done with great caution since periods in which different types of sawmills were used overlap by many decades in New England and elsewhere.
I am putting up what information I have, with pictures, as a resource for anyone interested in collecting saw sets as a hobby or as a general resource for anyone of interest. There are presently over pictures of different patented and non-patented saw sets on this site. This is not intended to be a price list, so if that is why you came, have fun looking at the pictures.
Seriously, the price of saw sets is dependent on the scarcity, uniqueness and interest just like every collectable and can make high prices. This site is dedicated to saw sets only and will not include saw jointers, raker gauges, saw filing jigs or saw vises, however if you want to know what they are go here other saw sharpening equipment. I am not claiming to have the largest, best or the definitive collection of saw sets, however I have been frustrated for years trying to get information on saw sets.
What information I have is posted on this site, with the most detailed in the Additional Information section below. Included in the Additional Information Section are the two articles from the ‘s on saw sets by the late Paul Morgan from the EAIA Chronicle and some original investigations into questions and histories of different manufacturers. This is a work in progress and will be updated as new pictures, information and time become available.